Elevator Belt Misalignment sensors

BAP2 Misalignment Sensor

• Rugged housing for the most arduous environments
• Fail safe magnetic sensor immune to build up of material
• Powerful sensing range of 12 – 50mm,easily adjusted on the sensor or at the control unit
• Links direct to PLC or to independent control unit A400 Elite, Watchdog Elite

Cert: ATEX Zone 20 & 21

TouchSwitch

• Mechanical Belt & Pulley Misalignment Sensor
• Detects tracking & misalignment on bucket elevators & conveyors
• Hardened stainless steel, wear resistant contact face
• Instantaneous misalignment signal, built-in test knob
• Compatible with B400 Elite, T500 Elite & Watchdog Elite

Cert: ATEX Zone 20

Shaft Speed Sensors

Whirligig & MagCon

• Suitable for all Braime sensors & other industry standard cylindrical sensors
• Not affected by shaft or machine vibration
• Easy to install, safe
• Optional “Magcon” simplifies mounting
• Heavy duty all stainless steel version available on request

Cert: ATEX Zone 20 & zone 0

M100 Stopswitch

• Stopped Motion Monitor Sensor
• Signals “stopped condition” on conveyors, fans and all rotating machinery
• Inductive proximity sensor which detects rotating metal target
• Single trip set-point signal if no pulse is received within 4 seconds
• Non-contacting & failsafe. Compatible with the Whirligig

Cert: ATEX Zone 20 & zone 1

M300 Slipswitch

• Microprocessor controlled underspeed monitor
• Signals underspeed for bucket elevators, conveyors and all rotating machinery
• Inductive proximity sensor in, 30mm diameter housing, which detects rotating metal target
• Single set-point ~ 20% underspeed
• 2 wire & 5 wire versions available
• Non-contacting & failsafe

Cert: ATEX Zone 20

Rotech & MagCon

• Rotating shaft monitor
• Provides information on shaft speed, direction, position or revolution
• For conveyors, elevators, mixers, fans, pumps, grinders & other mechanical handling systems
• Heavy duty versions - suitable for the most severe industrial environments
• Compatible with the “Magcon” quick-connect device

Whirligig Heavy Duty

• Including support housing for hazardous areas and environment where stainless steel is necessary
• Suitable for all Braime sensors & other industry standard cylindrical sensors
• Not affected by shaft or machine vibration
• Easy to install, safe

Cert: ATEX Zone 20 & zone 0

Bearing Temperature Monitors

WDB Series Bearing Sensors

• PTC Thermistor with fixed pre-set trip points from 50∫C to 120∫C
• NTC Thermistor for continuous measurement up to 110∫C
• Long term reliability
• Easy installation – replaces existing grease nipple
• Extensive range of PTC sensors available from 50∫C to 120∫
• For use with T400, T400 Elite, T500 Elite or Watchdog Elite control modules

Cert: ATEX Zone 21 & 22

Level Sensors and Choke Switches

Capacitive sensors

• Application: level indicators (tanks / silos); choke switches (chutes, conveyors, elevator legs)
• Detects presence or absence of liquids & free-flowing bulk granular materials
• Easy installation & self-containing

Cert: ATEX Zone 20

Tiltswitch Level Indicator

• Level indicator for bins & silos
• Suitable for almost all granular materials
• Alarm is triggered when material build-up tilts sensor by approx 15∫
• Sensor cable adjustable up to 5m

Cert: ATEX Zone 20

Auto-Set, Auto-Set Probe Chart, Remote AutoSet

• Radio Frequency Level Indicator and Remote Auto-set
• Suitable for almost all liquids and granular materials
• Detects presence or absence of material by measuring electrical “capacitance” in the vessel
• Unique 'Power Shield' ignores material build-up on the probe
• Standard probe lengths of 100mm, 200mm, 1M, 2M & 10M.
• Remote / high heat options available up to 250∫C

Cert: ATEX Zone 20 / CSA

Roto-Safe & RLI

• Single point rotary level indicator
• Detects presence or absence of bulk materials using a rotating paddle
• Power fail safe
• Heavy duty versions available
• Selection of paddles, extension shafts & mounting plates to suit most applications

Cert: ATEX Zone 20 / CSA

Inductive Sensors

P100 18mm Inductive Sensor

• Detects the presence of metallic objects in dangerous conditions such as in handling, warehousing, packaging, conveying, assembly, processing, etc.
• May also be used to generate pulses for the detection of rotational speed
• 2-wire multi-voltage technology or 10-30 VDC NPN/PNP
• Detects up to 8mm

Cert: ATEX Zone 20 & ZONE 1(gas)

P300 30mm Inductive Proximity Switch

• Detects the presence of metallic objects in dangerous conditions such as in handling,  warehousing, packaging, conveying, assembly, processing, etc.
• Detects the position of doors, trolleys, boxes, etc.
• 2-wire multi-voltage technology
• Detects up to 12mm

Cert:   ATEX   Zone 20

Multi Function Hazard Monitor

Watchdog

• Multi-Function Hazard Monitor
• Belt speed/alignment, bearing temperature, pulley alignment, blockage detection
• Full Microprocessor control
• Fully programmable via keypad to optimise elevator operation
• Simple, reliable, consistent

Cert: ATEX/IEC Ex Zone 21